Mic Archive
Audio-Technica AT4033/CL
Photo: Audio-Technica, from its spec sheet, p. 1.

Audio-Technica

Audio-Technica AT4033/CL

Large-diaphragm cardioid condenser (fixed-charge back plate), transformerless, with 80 Hz high-pass and 10 dB pad

Type
Condenser (electret)
Pattern
Cardioid
Sensitivity
−32 dBV/Pa
Self-noise
17 dB(A)
Max SPL
145 dB SPL
Impedance
100 Ω
Rated range
30 – 20k Hz

Frequency response

Angle
Distance

Frequency response: from the spec sheet, p. 2. Printed under the graph: "12\" or more on axis" (30 cm or more). Room and smoothing not stated.

Dashed: outside the rated range, or simulated (other angles and distances). Hover or tap the graphs for values.

Polar pattern

Polar pattern: from the spec sheet, p. 2. Full circle, 0° at the top, 5 dB per division. Measuring conditions not stated.

Compare with other mics

All specs

From the spec sheet
Capsule2-micron vapour-deposited gold diaphragm, floating capsule assembly, nickel-plated brass element baffle. "2-micron thick, vapor-deposited gold diaphragm undergoes a five step aging process"; "Floating-construction capsule assembly provides isolation from noise and vibration".p. 1
Sensitivity−32 dBV/Pa (25.1 mV/Pa), open circuit. "–32 dB (25.1 mV) re 1V at 1 Pa".p. 2
Self-noise17 dB(A), typical, A-weighted (Audio Precision System One). "17 dB SPL", footnote "Typical, A-weighted, using Audio Precision System One".
Max SPL145 dB SPL, 1 kHz, 1% THD; also 155 dB SPL, with 10 dB pad (nominal)
Signal-to-noise ratio77 dB, 1 kHz at 1 Pa; typical, A-weighted
Dynamic range128 dB, 1 kHz at max SPL, typical
Output impedance100 ohm. Low impedance balanced (page 1).
Rated frequency range30 Hz to 20 kHz. Tolerance not stated.
Poweringphantom 48 V DC. "48V DC, 3.2 mA typical".
Current draw3.2 mA, typical
Low cutoff, 80 Hz, 12 dB/octave; 80 Hz; 12 dB/octave; high-pass. "80 Hz, 12 dB/octave"; switch "Flat, roll-off".
Pad−10 dB. "10 dB pad (nominal)".
ConnectorXLR-3 male (integral). "Integral 3-pin XLRM-type".
Weight380 g. "380 g (13.4 oz)"; the 2002 leaflet says "less accessories".
Dimensions53.4 × 170 mm. Maximum body diameter × length: "170.0 mm (6.69") long, 53.4 mm (2.10") maximum body diameter".
Supplied accessoriesAT8449 shock mount for 5/8"-27 threaded stands; dust cover; protective carrying case
Output stageTransformerlessp. 1
OutputLow impedance balanced, pin 2 hot
Angle of acceptance120° (uniform)
Case styleR1p. 2
Diaphragm ageingFive-step ageing processp. 1
Operating temperatureAvoid more than 43 °C (110 °F) for long periods, and very high humidity
From the user guide (Recording Hacks copy)
Character (Audio-Technica)"A strong up-front presence characterizes the sonic signature of this versatile pro-audio classic"p. 1

Documents

Copies kept by Mic Archive, because manufacturers move and drop their documents. Each is © Audio-Technica, unchanged, with its original address.

Recording Hacks

Recommended for

Instruments whose sources name this mic, or an earlier version or variant of it.

Other mics