Audio-Technica AT4050

Large-diaphragm condenser, multi-pattern (cardioid, omni, figure-8), transformerless

Frequency response

Angle

Distance

Frequency response: from the spec sheet, p. 2. Printed under the graph: "12\" or more on axis" (30 cm or more). Room and smoothing not stated.

Dashed: outside the rated range, or simulated (other angles and distances). Hover or tap the graphs for values.

Polar pattern: from the spec sheet, p. 2. Full circle, 0° at the top, 5 dB per division. Measuring conditions not stated.

From the spec sheet
Capsule	dual large diaphragm, 2 micron vapour-deposited gold	p. 1
Sensitivity	−36 dBV/Pa (15.8 mV/Pa), open circuit, 1 kHz. "-36 dB (15.8 mV), re 1V at 1 Pa".	p. 2
Self-noise	17 dB(A), typical, A-weighted (Audio Precision System One)
Max SPL	149 dB SPL, 1 kHz, 1% THD; also 159 dB SPL, with 10 dB pad (nominal)
Signal-to-noise ratio	77 dB, 1 kHz at 1 Pa, A-weighted
Dynamic range	132 dB, 1 kHz at max SPL, typical
Output impedance	100 ohm
Rated frequency range	20 Hz to 18 kHz
Powering	phantom 48 V DC
Current draw	4.2 mA, typical
Low cut	off, 80 Hz, 12 dB/octave. "80 Hz, 12 dB/octave"; switch "Flat, roll-off".
Pad	−10 dB. 10 dB pad (nominal).
Connector	XLR-3 male (integral)
Weight	510 g
Dimensions	53.4 × 188 mm. Maximum body diameter × length.
Supplied accessories	AT8449 shock mount; dust cover; protective carrying case
Case style	R1

AT4050 Multi-pattern Condenser Side-Address Microphone (spec sheet, 0001-0198-01)
Spec sheet · 2010 · 2 pages · 0.5 MB
Download PDF Original on docs.audio-technica.com

Copies kept by Mic Archive, because manufacturers move and drop their documents. Each is © Audio-Technica, unchanged, with its original address.

Instruments whose sources name this mic, or an earlier version or variant of it.